-
- metal ceilings defined
- specification criteria
- sector criteria
- metal ceiling systems
- perforation patterns
- trims and perimeters
- trims and perimeters overview
- trims compatibility table
- channel trims
- angle trims, open cell and fibre
- metal tile to plasterboard trims
- bulkhead trims and tee sections
- system 130 to plasterboard trims
- blind box trims
- dry lining trims
- radiused trims defined
- trims & perimeters silhouettes
- trim accessories
- component listings
- installation advice
XP Frames
|
XP frames from SAS International are a range of expandable depth door and window frames that can be installed into either plasterboard partitions or brick and block walls between 74mm and 225mm thick.
XP frames are fully depth adjustable and are not reliant on set wall thicknesses or perfectly square openings. Manufactured from aluminium both the door and window frames can provide up to 60 minutes fire resistance, integrity only.
All door and window frames are supplied factory assembled as fully finished door or window sets. Door sets are supplied with the appropriate sized door frame and a factory fitted door leaf, complete with vision panel and any non-protruding iron mongery. Window sets are supplied with the appropriately sized frame and glass.
Reducing on-site installation time the frames can be installed within 20 minutes. Once unpacked the frame separates into an inner and outer frame. Once fitted, architraves, door stops or glazing beads are then effortlessly clipped into place. The door leaf is then lifted back into the frame and the remaining ironmongery, levers, pull handles and door closer are fitted.
To meet the varying wall thicknesses, three different sized frames are available with either rounded or square clip on architraves or stops:
Standard: • For wall thicknesses between 74mm and 123mm
Intermediate: • For wall thicknesses between 118mm and 165mm
Jumbo: • For wall thicknesses between 133mm and 225mm
XP door sets are available with both 44mm and 54mm standard and bespoke door leaf sizes, window frames can be supplied with a range of glass between 6mm and 15mm. Bespoke door and window frames to suit other openings or finished in any RAL colour can be manufactured to order.
Non-standard sized single and double door frames can accept a maximum door leaf size of 2700 x 926mm. Window frames, both single and double glazed, can be manufactured up to a maximum frame size of 3000mm high x 1200mm wide, subject to glass thickness and fire rating.
Colour
XP frames are supplied as standard with a polyester powder coated smooth finish in either:
• RAL 9010 - 20% gloss
• RAL 9006 - 20% gloss
The frames can be supplied in any RAL colour or alternatively in a fine textured finish (SAS FT) or anti-bacterial coating (SAS AB). |
Video
Typical Construction
Acoustic Fire and Performance Summary
|